.. include:: /substitutions.rst
.. include:: /urls.rst

.. _lsv2_getting_started:

Get started
===========

These instructions help you connect your Librem Server to your network.

Set up
------

#. Connect power to both power supplies using the provided cables.
#. Connect the **LAN1** port to the network with an Ethernet cable.

   .. image:: /_files/LS/librem_server_ethernet.png

#. If you ordered a PureBoot bundle, which includes a Librem Key for tamper detection, connect the Librem Key to any USB port.
#. Connect a display to the VGA port for initial setup.
#. Connect a keyboard to a USB port for initial setup.

Power on
--------

#. Press the power button on the front of the chassis.
#. Wait for the system to power on.
   The first boot after power is applied may take up to 2 minutes while the BMC (Baseboard Management Controller) initializes.
#. When you are prompted for a password to unlock the encrypted disk, enter the password and press Enter.
   The default password is **123456**.
   For anti-interdiction customers, the Operations team coordinates with you to choose a password.
#. Wait for the disk to be encrypted during the first boot.
#. When boot completes and the login prompt appears, log in.
   The default username is **purism** and the default password is **123456**.
   For anti-interdiction customers, the Operations team coordinates with you to choose a password.

Configure network
-----------------

#. Set the name of the system: ``sudo hostnamectl hostname <your-hostname>``
    * The hostname can be up to 64 characters and should not contain spaces or dots.
    * Commands using ``sudo`` may prompt for your password.
      If so, type your password and press Enter.
      For security, nothing is shown on the screen when typing.
#. Enable the first network interface: ``echo $'[Match]\nName=eno1\n\n[Network]\nDHCP=yes' | sudo tee /etc/systemd/network/eno1.network``
    * This uses DHCP to obtain network addresses automatically.
      If you want a different configuration, consult the `Debian manual <debian_systemd_network_>`_ and `systemd.network documentation <debian_systemd_network_man5_>`_.
#. Enable the network daemon: ``sudo systemctl enable --now systemd-networkd``

Update
------

With networking now connected, :ref:`update your system <pureos_sw_update_terminal>`.

Next steps
----------

You should :ref:`change the system passwords <pureos_passwords>`.
After that, you may want to :ref:`enable remote SSH access <pureos_remote_ssh_access>` and :ref:`enable remote disk unlock <pureos_remote_disk_unlock>`, so you do not need a keyboard and display connected to the server.